Posté: Mar 31 Déc 2024, 19:01
Bonsoir,
Voici ce que j'ai trouvé dans la manuel de réparation du 958:
Mais il te faut vérifier avec le manuel du 957 turbo, ce que j'indique est à titre indicatif
Fit cylinder head. Insert cylinder head screws (screws can be re-used). For tightening
specifications, see → 1001IN TIGHTENING TORQUES, TIGHTENING SEQUENCES,
ASSEMBLY OVERVIEWS
donc les vis de culasse peuvent être réutilisées sur 958
pour le serrage, voici la procédure, assez compliquée
Cylinder head to
upper part of
crankcase
M11 x 1.5 x 140
(20 ea.) Step 1;
1st turn
Tightening
torque
30 Nm (22
ftlb.)
Cylinder head to
upper part of
crankcase
Step 1; 2nd turn Tightening
torque
50 Nm (37
ftlb.)
Cylinder head to
upper part of
crankcase
Step 2; loosen
(approx. 2 turns)
Torque angle 720°
Cylinder head to
upper part of
crankcase
Step 3; 1st turn Tightening
torque
30 Nm (22
ftlb.)
Cylinder head to
upper part of
crankcase
Step 3; 2nd turn Tightening
torque
30 Nm (22
ftlb.)
Cylinder head to
upper part of
crankcase
Step 3; 3rd turn Torque angle 110°
Bon réveillon,félicitations pour ce gros chantier et en 2025 tu auras un moteur tout neuf !
Voici ce que j'ai trouvé dans la manuel de réparation du 958:
Mais il te faut vérifier avec le manuel du 957 turbo, ce que j'indique est à titre indicatif
Fit cylinder head. Insert cylinder head screws (screws can be re-used). For tightening
specifications, see → 1001IN TIGHTENING TORQUES, TIGHTENING SEQUENCES,
ASSEMBLY OVERVIEWS
donc les vis de culasse peuvent être réutilisées sur 958
pour le serrage, voici la procédure, assez compliquée
Cylinder head to
upper part of
crankcase
M11 x 1.5 x 140
(20 ea.) Step 1;
1st turn
Tightening
torque
30 Nm (22
ftlb.)
Cylinder head to
upper part of
crankcase
Step 1; 2nd turn Tightening
torque
50 Nm (37
ftlb.)
Cylinder head to
upper part of
crankcase
Step 2; loosen
(approx. 2 turns)
Torque angle 720°
Cylinder head to
upper part of
crankcase
Step 3; 1st turn Tightening
torque
30 Nm (22
ftlb.)
Cylinder head to
upper part of
crankcase
Step 3; 2nd turn Tightening
torque
30 Nm (22
ftlb.)
Cylinder head to
upper part of
crankcase
Step 3; 3rd turn Torque angle 110°
Bon réveillon,félicitations pour ce gros chantier et en 2025 tu auras un moteur tout neuf !